CHRL=_5_BIT, PAR=EVEN, USART_MODE=NORMAL, CHMODE=NORMAL, USCLKS=MCK, NBSTOP=_1_BIT
Mode Register
| USART_MODE | USART Mode of Operation 0 (NORMAL): Normal mode 1 (RS485): RS485 2 (HW_HANDSHAKING): Hardware handshaking 3 (MODEM): Modem 4 (IS07816_T_0): IS07816 Protocol: T = 0 6 (IS07816_T_1): IS07816 Protocol: T = 1 8 (IRDA): IrDA 9 (LON): LON 10 (LIN_MASTER): LIN Master mode 11 (LIN_SLAVE): LIN Slave mode 14 (SPI_MASTER): SPI Master mode (CLKO must be written to 1 and USCLKS = 0, 1 or 2) 15 (SPI_SLAVE): SPI Slave mode |
| USCLKS | Clock Selection 0 (MCK): Peripheral clock is selected 1 (DIV): Peripheral clock divided (DIV = 8) is selected 2 (PCK): PMC programmable clock (PCK) is selected. If the SCK pin is driven (CLKO = 1), the CD field must be greater than 1. 3 (SCK): Serial clock (SCK) is selected |
| CHRL | Character Length 0 (_5_BIT): Character length is 5 bits 1 (_6_BIT): Character length is 6 bits 2 (_7_BIT): Character length is 7 bits 3 (_8_BIT): Character length is 8 bits |
| SYNC | Synchronous Mode Select |
| PAR | Parity Type 0 (EVEN): Even parity 1 (ODD): Odd parity 2 (SPACE): Parity forced to 0 (Space) 3 (MARK): Parity forced to 1 (Mark) 4 (NO): No parity 6 (MULTIDROP): Multidrop mode |
| NBSTOP | Number of Stop Bits 0 (_1_BIT): 1 stop bit 1 (_1_5_BIT): 1.5 stop bit (SYNC = 0) or reserved (SYNC = 1) 2 (_2_BIT): 2 stop bits |
| CHMODE | Channel Mode 0 (NORMAL): Normal mode 1 (AUTOMATIC): Automatic Echo. Receiver input is connected to the TXD pin. 2 (LOCAL_LOOPBACK): Local Loopback. Transmitter output is connected to the Receiver Input. 3 (REMOTE_LOOPBACK): Remote Loopback. RXD pin is internally connected to the TXD pin. |
| MSBF | Bit Order |
| MODE9 | 9-bit Character Length |
| CLKO | Clock Output Select |
| OVER | Oversampling Mode |
| INACK | Inhibit Non Acknowledge |
| DSNACK | Disable Successive NACK |
| VAR_SYNC | Variable Synchronization of Command/Data Sync Start Frame Delimiter |
| INVDATA | Inverted Data |
| MAX_ITERATION | Maximum Number of Automatic Iteration |
| FILTER | Receive Line Filter |
| MAN | Manchester Encoder/Decoder Enable |
| MODSYNC | Manchester Synchronization Mode |
| ONEBIT | Start Frame Delimiter Selector |